LargeFormat EcoSolvent

We print large format Eco Solvent at the Copie-Sjop on the Roland Versacamm.
The advantages of this printer are the high resolution and the use of 6 colors; cyan, magenta, yellow, yellow, light cyan and light magenta. This printer therefore has a larger color range than a regular printer that works with 4 colors (CMYK). This combination allows us to match and often even exceed photo quality.
The printer does color management, photos are best delivered in RGB because of the large color range. The printer (in combination with the software) can also emulate pantone colors. The printer uses EcoSoll Max ink. This makes the prints UV and water resistant. Widely used for photo work, advertising posters, stickers, window advertising, wallpaper, banners, light boxes, etc., etc.
Another advantage of this printer is that it can also cut contour.
The prints are intended for indoor and outdoor use and after plasticization they will remain beautiful even longer.

Properties of the printer

resolution: 1440 dpi
max. print length: 30 meters
max.print width: 105 cm
print margins: 5 mm all around
technology: Piezoelectric Print Technology

Delivery of files

  • You can of course visit us at the Westvest with a USB stick, DVD or hard disk.
  • Via email: do not forget to mention your telephone number for any questions.
  • You can also send files through a site like WeTransfer .

Submit PDF, JPG, TIF

It is best to submit files for large-format prints as a PDF with the following settings:

  • Raster images 200 dpi
  • Line graphics 1200 dpi
  • Insert fonts (fonts embedded)
  • Flatten all layers (flatten image)
  • Flatten transparencies
  • Color mode RGB or CMYK

Cutting plots
It is best to deliver files for cutting work as EPS, the cutting contours must be indicated in vector format.
Programs that support this are Adobe Illustrator and Corel-Draw

When submitting hard copy, we must first scan the originals. Look for this on the page scanning.

190 grams satin white paper
We print on 190 grams satin white paper as standard, ideal for printing photos with a slightly glossy top layer.

Format price
A3 (297 x 420 mm) € 9.00
A2 (420 x 594 mm) € 14.50
A1 (594 x 840 mm) € 21.00
A0 (840 x 1188 mm) € 38.00
Different format € 4.10 per 10 running centimeters

SyntiSOL PP Film 170 µm
Water resistant satin coated, tear resistant polypropylene film with a gray backing. The film has a paper touch and the prints are characterized by superior color saturation and sharpness. The product is very suitable for applications in the in- and outdoor area, especially in the POS area

Format price
A3 (297 x 420 mm) € 13.50
A2 (420 x 594 mm) € 22.50
A1 (594 x 840 mm) € 42.50
A0 (840 x 1188 mm) € 67.50
Different format € 7.50 per 10 running centimeters

Aurolux Backlit Film WR glossy 150 µm
Glossy coated polyester film. The strength of this backlit film lies in its very pleasant gloss, the beautiful brilliance in illuminated and transmitted light and its exceptionally high resistance. The film has excellent scratch resistance. This backlit is suitable for day and night applications. Also suitable for use in places with high humidity. We use it in our light boxes outside.

Format price
A3 (297 x 420 mm) € 14.50
A2 (420 x 594 mm) € 22.50
A1 (594 x 840 mm) € 43.50
A0 (840 x 1188 mm) € 68.50
Different format € 7.75 per 10 running centimeters

Wallpaper Non-woven design2wall Sol satin 195 g / m²
High-quality non-woven wallpaper with a special coating that is distinguished by its high color brilliance and scratch resistance. On the basis of these properties, the printed wallpaper can be applied to the wall with a standard wallpaper adhesive without further surface protection. The material is PVC-free and easy to remove.

Format price
A3 (297 x 420 mm) € 9.50
A2 (420 x 594 mm) € 16.50
A1 (594 x 840 mm) € 29.50
A0 (840 x 1188 mm) € 55.00
Different format € 6.25 per 10 running centimeters

Polymer PVC Foil self-adhesive white glossy 80 µm with gray adhesive layer
For highly brilliant and colorful long-term solutions for the indoor and outdoor area. The solvent-free, repositionable adhesive layer is particularly distinguished by its excellent climate and UV resistance. The adhesive layer is environmentally friendly and shows a high adhesive power. The film sticks well to difficult surfaces such as plastic plates. This also allows processing on wet surfaces, which ensures easy and bubble-free processing. The gray adhesive layer is characterized by increasing the opacity of the material and ensures perfect coverage of the substrate. Thickness of foil + liner 100 µm.

Format price
A3 (297 x 420 mm) € 12.50
A2 (420 x 594 mm) € 21.50
A1 (594 x 840 mm) € 30.50
A0 (840 x 1188 mm) € 57.50
Different format € 6.75 per 10 running centimeters

Picasso Gallery Canvas satin 370 g / m²
Coated Artistic canvas with a 1: 1 canvas structure for the highest print quality. The colors are excellently fixed on the surface, so a beautiful color brilliance. The coated surface is water-resistant and shows excellent light stability. This canvas can be stretched smoothly. The end result is a water-resistant, satin-finished print.

Format price
A3 (297 x 420 mm) € 19.50
A2 (420 x 594 mm) € 33.50
A1 (594 x 840 mm) € 47.75
A0 (840 x 1188 mm) € 85.50
Different format € 8.75 per 10 running centimeters

Expolit® 456 Banner M2-B1 500 g / m²
Promotional banner material, coated strong polyester fabric for events, advertising banners, bill boards, wall cladding, etc. The material is available in a glossy and a matte version. A guaranteed durable surface stability.

Format price
A3 (297 x 420 mm) € 12.50
A2 (420 x 594 mm) € 23.50
A1 (594 x 840 mm) € 35.50
A0 (840 x 1188 mm) € 64.50
Different format € 9.00 per 10 running centimeters

All prices quoted include VAT and are ready while you wait.
Adjusted rates apply to people in possession of a repro ticket.